GateGuardX on Viking gates.
The short answer: if your Viking gate has a motor and opens on a signal, the way a keypad or remote does, and nearly all do, GateGuardX works with it. No rebuild, no replacement, installed in about half a day.
Viking Access Systems is a US manufacturer of vehicular gate operators headquartered in Irvine, California, and has been part of the FAAC group since 2019. The company produces swing and slide gate operators for residential and commercial applications, including solar-powered and underground variants. Its operators are designed to UL 325 and UL 991 standards and many models feature built-in battery backup.
(In the gate trade, an “operator” is simply the motor that opens the gate.)
Viking makes sliding and swing gates, and the same simple rule covers them all.
Common Viking models include G-5, R-6, K-2, H-10. Whether it works is determined by what's on the control board, not the model name, so send two photos and we confirm yours specifically.
It triggers your gate motor, it doesn't replace it.
- We wire to the same terminals your remotes use, often inside the motor housing.
- Your keypad, intercom, and remotes keep working as fallbacks.
- Your gate's own safety features (photo-eyes, safety edges, auto-reverse, to the UL 325 standard) stay fully in charge of the moving gate. We never bypass a safety device.
- No digging, no reconstruction, fully reversible.
Is Viking a supported brand?
Yes, Viking gates follow the same simple rule we check on every install: if the gate has a motor and opens on a signal, GateGuardX works with it. We confirm yours from two photos, within 48 hours.
Do I need to replace my Viking gate or gate motor?
No. GateGuardX installs on the gate you already have, a small controller tells your existing gate motor to open, exactly like a keypad or remote does.
What if I can't find a dry-contact input?
Most control boards have one, often labeled for a keypad, intercom, or remote. If yours doesn't, a small relay add-on provides it. Send a photo of the board and we'll point to the exact terminals.
Will it conflict with my keypad, intercom, or remotes?
No, GateGuardX adds a trigger alongside what you already have. Keep your keypad, intercom, and remotes as fallbacks; the plate reader simply becomes the primary way in.
Confirm your Viking gate in 48 hours.
Send two photos, the gate and the control board, and we'll send a clear yes/no with exactly how we'd integrate, usually within 48 hours. No sales call required.
- 30-day money-back guarantee
- 1-year hardware warranty
- No gate replacement
- Compatibility answer in 48 hours