From manual gate to automated entry, with a half-day install.
We install a camera, a smart controller, and a processor wired to your existing gate motor, your gate stays. Most sites go live the same day the hardware arrives. Fully reversible: if you cancel within 30 days, we remove everything and restore your gate to its original state.
Three parts we add. Nothing you replace.
A plate-reading camera, a small computer on your site, and a small switch at your gate motor. The decision never leaves your property, watch a vehicle go through, then unplug the internet and watch it still work.
Click any part, or press Play a crossing.
Vehicle detected
The camera reads the plate as the vehicle pulls up, even at an angle, in low light, or with a dirty plate. Under a second.
Gate opens
If the plate is on the authorized list, the gate opens automatically. No stopping, no window down, no intercom.
Everything is logged
The crossing is recorded with a timestamp, plate photo, full vehicle image, and a short video clip, searchable by plate, date, or vehicle group.
Not on the list? The gate stays shut, you choose what happens next.
GateGuardX never opens on a guess. When a plate is not on your access list, the gate stays shut and follows the rule you set, Conversational AI (in beta) can greet the visitor and decide, or it falls back to your intercom, keypad, or a guest pass, or escalates to your team. Either way, the attempt is logged.
A certified partner where available, or your installer, with our engineers on the line.
Every install follows the same playbook. We assess your site from photos and pre-configure the hardware before it ships. From your go-ahead, ordering and pre-configuring that hardware and scheduling the crew usually takes about 2–3 weeks; the on-site work itself is under a day. The physical mount typically takes 2–3 hours on your existing motor. It's done by a GateGuardX-certified partner where one is available, or by your own gate installer or electrician while our engineers guide them remotely. Your itemized quote states which applies to your site. Then we connect the dashboard and test with real vehicles before you're live. No rewiring, no concrete work, no structural changes, and for multi-site rollouts, we lock the playbook at your first gate and repeat it, site by site.
Go live on your gate, with a half-day install.
Send a few photos of your gate and we'll confirm compatibility with a detailed quote, usually within 48 hours. The on-site install itself takes about half a day; most sites are live within about 2–3 weeks of giving the go-ahead.
- 30-day money-back guarantee
- 1-year hardware warranty
- No gate replacement
- Compatibility answer in 48 hours